An Introduction To Interior Paintings Designs And Paints

This All About Interior Design information will guide you about the most appropriate options available in Interior Painting Designs, paints and colors, you should tutor yourself on the basics used in interior paints because the colors and paints used for interior are not the same used outside. The paints used to cover the exterior of the house have more resistant power against moisture and harsh climatic conditions.

The paints used outside have more concentration of pigments to prevent an early fading of the shine and they can withstand weathering effects for a longer period. Paints used inside are diverse in nature and colors suiting different forms of surfaces, so it very crucial to put the right paints on the appropriate surface for everlasting finish.

Interior Painting Designs and colors are selected on the basis of area and the function the paint is used for, as the options are many so both should complement each other. Paints rich in gloss and resin should be applied on surfaces where there are heavy movements like kitchen, passage ways, car parks and utility rooms. They become hard when dry and do not dress out easily.

Such paints look good because of giving shine and gloss and make the space look fabulous even in dark tones. Latex paints are best for use on stones, rocks and brick walls as they are water base paints and can smash up wood walls and iron works. These paints give a very fine result when used on walls already painted with heavy gloss paints.
For rustic and matte looks rubber paints can be used. They are very durable, easily cleaned and sustained. They are well-suited on bricks, stone and clay walls. For ceilings paints with low concentration of resin are used because ceilings are usually not touched and they do not undergo scratches.

Interior paintings designs and patterns are made on walls and ceilings by special texture paints. Texture paints are of two types, alkyd and latex paints. To give walls different textures paints with sand particles are sprayed so that it gives embossed textures to the walls. Wood is a difficult material to paint and suits with oil based paints like alkyd paints. Alkyd paints can be used to cover all types of wood surface and walls layered with primers.

Bathroom also needs special considerations and points to focus before painting and more important is the type you choose not the color. The inside of the bathroom has a high percentage of moisture and steam and provides home to many types of moulds and fungus. Therefore it is obvious to select the paint which is water repulsive and does allow the growth of moulds.

The most excellent types easily available in the market are shades of “interior latex with mildew inhibitors.” The shade of color should depend on the size of bathroom, if the bathroom is small in size and to give it spacious look go for light pastels in the background and decorate it with darker color splashes or designs on it. If the bathroom is tiled than even the paint should also match with it.


Note: Only a member of this blog may post a comment.

Several ways to have Tropical Living Room

Do you just want to escape somewhere living in a typical past way? Do you want to get into the lives of traditional tribe where there would be the tropical climate? Sounds interesting, isn’t it? If it so then you should take care of many things. You should manage from kitchen to the type of house you are living in. It gets different when you are living in a place where you are making a new house as you can manage everything from a totally new way.
You can also make several types of amendment of many rooms of the house. Like this, you can have various ways of making a tropical living room. You do not need to spend millions to do this.

Making a New Home Matching Tropical Climate

It just needs some tint of perseverance as well as courage to get into a new ways of living. First thing you should do before planning other things is that you should get a land. May be you would like to live in some spare land in midst of forest. May be you would like to live somewhere in the midst of country people. May be you would like to live somewhere where there are hills and waterfalls? You should first decide these things. After this, you can jump to other plans. Like this, you may also want to get a garden and the plants that live in the same climate. You can go for it!

Maintenance of Garden for Tropical Climate

As per the garden outside your house, you can manage different things. You can choose the plants that give various types of fruits that grow in various seasons. You should at least try to get the type of plants and the flowers so that your garden does not seem totally dull in some season. Let your garden design ideas show all the joy and the status of the nature as per the season it has got for tropical living room. You should also make the necessary types of the caring in time to time. Putting water to the roots and also using manure as necessary. You can also study about different plants of tropical climate. Normally, garden boxes can be used for the use of various types of plants there in the house.

Then, you should also take care of the design. When you have a full garden design ideas but every plant and the flower is in every place without proper way to walk with, your garden design ideas looks all mess in spite of all the things you have managed with labor. After this, you should also make the kitchen managed as a part of your living room? You should buy various storage shelves that reflect nature. In an ideal kitchen that shows tropical climate for tropical living room, it is necessary that you should put several of the food items such as they have grown there themselves in the room.
You should get the shelves so that you can also differentiate the different places for the foods like dry foods. It is also necessary for other things like equipment storage. Different types of equipments like knives, spoons, these things help the kitchen to be better and an ideal one for tropical themed living room

Several Types of Kids Storage Ideas

Is your kids’ room a mess? Do you always plan something good and suggest to them but in spite of this, is there no change in your kids’ room? Do not worry; it is the condition of most families. All you need to be is a little bit patients and try to figure out things for your kids’ room needed. May be your kid is a real nerd who is always fond of books and these are only problems for all the mess of your kids’ room. May be your kid is really distracted due to various things which does not allow time for him/her to manage the,  things of the room.

In these conditions, including your kids don’t obey!, you can plan for kids storage ideas so that there is always clean as well as proper sanitation there in your kids room. First of all, you should manage the shoes and slippers your kids use. You can get various shoes boxers so that your kids have a habit of putting off their shoes or slippers out there which will allow the mess of the room to be little less. Establishing this habit will surely make the kids advantageous in future too. Likewise, you can also make various types of shoes boxes and decorate them.

Making the Shoe Boxes as Kids Storage Ideas

First of all, you can use those shoe boxes for putting several of the materials too. There may be coins, marbles, puzzles, art blocks or small playing things that are acting as clutter in your kids’ room. You can put them in the shoe box you have just prepared. You should not mistake of putting the box as plain as it is. You should always entice the children with various colorful things so that your children get joyful and try to look the box every time they need. You can use several of the crayons and colors out there to make different types of arts there in the box.

You can also write something interesting that fascinates the kids. After that, you can use various lockers for storing several things. The main advantage of having lockers is that your kids learn about the secrecy maintenance to be done there. Put the locker in a suitable place where there can be safety as well as it increases in the decoration of the room. You can also put different types of drawers in your kids’ room. You can suggest them for the things that need to be done. Normally, when there are lots of drawers in the room that makes the room hectic.

Putting Various Types of Arts

You need to make a routine as well as index type of thing so that they learn where to place the things. Similarly, other main thing that is to be done is that you should make your kids’ room really attractive. You can put various types of colorful arts, picturesque of landscapes as well as different photos of the anime that your children get fascinated with. With these things, you can have different kids storage ideas for kids’ room. You should also not forget to make it simple and plain so that your kids learn something from it.

Making the House Ceiling Design Look Magnificent

Do you want to increase the beauty of your room with several of the ideas? When it has come to the ceiling design there are several of the ways you can make your ceiling better. First you can choose variable colors. First, you can go with the virtual image in computer or in drafts. You can use various types of graphs to analyze different parts of your room. The crucial point is that it should be properly done. With these ways, you can also add different paintings or something that has poetry or some good art as for house ceiling design.

Using of Famous House Ceiling Design for Decoration

You could also make something if you have got the creative streak there. Embellishment is always better for such sorts for house ceiling design. You can also use famous designs that can provide great storage of the things of the room. The room contains surely various types of things. There may be small things that destroy the good imagery of the room itself. The small things can be used to put in the box so that it looks clean and good. You can also paint in the walls using various ideas. This is because it also affects for the ceiling’s designs too.

 You can use various types of shading and lighting as per the room’s lighting and shading. Then you also should check over the proper lighting. Color the walls if necessary. You should also use the proper curtains, colors and direction of the things of your room to make a proper effect to be seen in ceiling. Try to use colors that last long that are durable. It is not required that you should use the popular companies’ colors. First requirement is that you should choose one that is durable.

Management of Other Parts of the Room

After that, you can come to some decorative choices. This also should be done if your budget allows for it. After this, you should go for the design. Design is highly important in the decoration of ceiling as it is the thing that really defines it. It is the main thing that people’s eyes go to when they enter the room. It is probably the biggest furniture that is used in the room. Every small thing should be given a stylish touch. You also should buy other things to make the ceiling look better.

Suppose you are designing for the elitist room with few elitist things. When you are thinking of buying various things for the room, you should not just get into the supermarkets aiming for expensive things. You should know you should spend the money wisely.
You should choose required things and manage them as beautifully as you can as. This is the main reason. You should not blunder of going to expensive type of stores. Do you know you could also buy secondhand things for this purpose? You may be puzzled. But, there are several of the cases where students have maintained the decoration sophisticated as well as intimidating with some secondhand thrift too. You can also get online help from various designers. Therefore, in these ways, you can get interior design photos and make your room look better.

How to Build Post and Beam Homes

Through the use of a designer or contractor's assistance, it is imperative to obtain advice in order to make sure that the addition of the new timber wood beams go along with the rest of the older construction of a living space.

It needs to be completed using a thoughtful process and relate to older parts of the home. You cannot just fit an older building to the extensions.

The beam extensions must fit the home instead.

You cannot over extend using wooden beams.

It is suggested that anything over a 25 percent increase in floor area could not only distract from the character of the home but could also create a structure that is not actually as sound and could end up causing damage instead to the building.

Extensions should not be added with the intention to out do or out last older parts of the structure. One thing to also keep in mind is that if a home is considered a historical home or listed as a conservation area, any changes to the home needs to be discussed with a local planning authority.

This should be done before actually starting any work. If your house falls within certain limitations, you can actually be reimbursed or save money on the costs to revamp a building.

When making changes to the structure of a building, always consult a building contractor or architect that is knowledgeable in working with older structures.

Try to avoid using salvaged materials as they are not able to withstand the wear and tear as newer materials. This is not an area to try to skimp on cost.

This older wood can be warped, difficult to work with or may be more apt to become damaged and simply not fit a new frame.

The older wood is actually hard. Ceilings that have beams are typically lower so it can be difficult to determine where to place the extensions properly.

That is why it is imperative to have an expert to work with you. This is no do it yourself project unless you are well experienced in structure of this nature.

Even then it takes a crew to determine the measurements and all the proper procedures.

There is no minimum ceiling height but a typical standard one is at least 2.4 meters from the floor to the ceiling, with 2.1 meters being a minimum.

If the ceilings are sloped and cathedral like or you want to use beams that follow the pitch of the roof, keep this in mind when adding extension beams.

A surveyor should be able to work alongside an architect to make sure that all of the ceilings are not too low as a result of adding wooden beams to the interior of a residence.

As previously mentioned, wattle and daub materials once consisted of earth and animal dung. There are more modern materials that satisfy the same purpose.

A mixture of lime and hemp can do the trick because it sets very solid. For insulation, use sheep's wool insulation for thermal purposes.

It will still comply with power and fuel regulations. Also, consider underfloor heating components which allow for the system to operate at a lower temperature allowing for heat to rise.

This method can also prevent the warm air and changing humidity from ruining the wooden beams and allowing them to last longer.

Never try to make wooden beam structural additions resemble perfection. The contrast and differences in the beams give more character to the aesthetics of the structure and the overall appearance of the interior.

The beams can give a room a certain feeling of comfort and warmth. The varying shades of wood or even the blemishes of the beams can add quirkiness.

Should you expose beams of your structure? 

You can create a more open space and there are several other reasons to show off the support beams.
If your house is listed as a part of history, remember that removing plaster that is historic may decrease the charm and appeal of an older house.

It could potentially damage most of the historic composition of the home including any wall art.
Exposing beams may look awkward if there are more contemporary additions to the space such as a modern fireplace or contemporary windows.

ge creates qualities in the beams such as sagging, bowing and bulging and may still be structurally sound. Messing with that can create a disaster if it is not gone about properly.

Sometimes it is better to repair old wooden beams rather than replace. If an area is significantly damaged, that is when you can and should make replacements with newer, more sound and reliable beams.

While exposing wooden beams are beautiful additions to add an interesting appeal to the inside of your home, it is a process that takes a considerable amount of planning and work.

In homes that are not listed as historic, the process can be completed without going through any red tape but keep in mind that what you may uncover may not be what you were hoping for.

Already existing old beams that were hidden will remove the encasing and expose what lies beneath.
Exposing beams can result in a big cloud of plaster, removing many nails and even staining or painting the beams so that they are attractive.

Some of the beams may have never been intended to be exposed in the first place and could result in severe ugliness perhaps from damage over time or even to mask fire damage to the interior.
It may be an undertaking that you are not ready for so definitely be prepared. Seek professional assistance to renovate and to keep from creating irreversible damages.

Can you fit in a range?

Modern range cooker a commercially inspired with cutting-edge looks, the latest ranges have it all. Ever found yourself cooking a complex feast for family or friends, Hand discovered something just won't fit into the oven or your hob suffers a lack of burners? The solution could be a modern range cooker. Latest ranges combine great looks with multi functionality, endowing the home cook with professional capabilities.

Dual-fuel ranges provide the benefits of both gas and electricity, and hobs usually come with at least five burners - some models also feature griddle or wok hob options.

Their sleek design ensures they are very often easy to keep clean and in top condition. Like their traditional counterparts, modern ranges help to make the kitchen the center of the home, but with the very latest technology.  


Before you rule out a modern range because of size, it's worth considering that some models come in no wider than 70cm. As regular convection ovens are 60cm it means you can end up losing as little as 10cm of cupboard space. Check the depth of the range in relation to the standard depth (60cm) of your units.

Many models will fit snugly, but 'professional'-style designs can be 15cm deeper so they will stand proud of the work surface. Make sure the range can be adjusted to the height of (or just higher than) your cabinets.

Provided you have enough space between the two sets of cabinets, a range cooker is fairly easy to install. It just needs to be located in easy reach of a fuel source.

A gas- or dual-fuel-powered range should be near a gas supply and plug socket. Electric models just need to be located near to a plug socket. The larger the range, the greater the power (extraction rate) and the larger the extractor hood required.

5 Steps to kitchen planning easily

Have a contingency budget. Most projects take longer than you think and cost more than planned! It's a good idea to put aside 10 per cent of your budget for emergency building repairs and unforeseen expenses.  


It's useful in the very early stages to look at what you , dislike about your existing kitchen. Make a list of all the things that annoy you - lack of storage space, old-fashioned design, poor layout - and think carefully about how you might improve them.

Build a scrapbook of kitchens and accessories you like, but make sure you look it over carefully and weed out things you've changed your mind about before you visit any kitchen showrooms. Try to have a clear idea of the design and color you like at the start - there are so many other decisions to make, it will help you to have a solid base.  


  Remember, from the budget DIY stores to the high-end kitchen specialists, the experts are there to help. Make use of online or in-store design systems and visit several showrooms in your budget range to get quotes.

Don't always assume a kitchen specialist will be more expensive, as many of them stock designs in a range of budgets. Make your needs and desires as clear as possible - a good designer will ask about you, your family and how you envisage using the space, as well as more practical things, such as design and cost. Start by creating your kitchen wish-list that includes your must-have features.  


 A new design will often include new appliances. If you're going to a large retailer, kitchen showroom or high-end specialist, you can often buy your appliances through them. If you prefer to buy them yourself - the internet is a good place to source bargains - then make sure you coordinate their delivery after speaking to the kitchen showroom or builder.

Worktops, flooring and taps can also be supplied by the company you're buying your cabinetry from but, again, if you choose to buy direct then ensure you've got a schedule from your builder or kitchen company.  

SET YOUR BUDGET Your budget will ultimately decide where you buy your kitchen but remember your money won't entirely be spent on the kitchen units and appliances. Will your project involve building work, for instance, and are you planning to organize that yourself or are you looking for someone else to do it for you?

Even the simplest kitchen redesign is likely to involve builders to remove the old units and possibly electricians and plumbers, too, if you're changing your layout. Consider flooring and worktop choices carefully. Opting for underfloor heating will impact on what floor you choose, which will have cost implications.  


Now you need to start pulling all the elements together. Do you need a builder or an architect? Are you building an extension that requires plans? Does the design require planning permission or building regulations approval? You need to find this out at the start to avoid having to make costly changes later. Make sure to get a number of quotes and contact builders well in advance as the best are often busy.

Choose a kitchen designer who's on your wavelength. Just as important as style and price is finding a designer who understands your family's wants and needs and takes heed of your wish-list.

Kitchen Heating for winter

Stove or fire can provide extra, controllable heat for larger kitchen-dining-living spaces, adding a cosy focal point to a room where the family might gather to eat, cook and socialize. Sophisticated technology now means that there is a fire or stove to suit any location - whether it's an internal or exterior wall, or the center of the room - and for a wide range of fuels.  


 Stoves can be powered by solid fuel (ie coal or smokeless fuels), wood, oil, gas, biomass, LPG or electricity. Multi-fuel models can burn wood, coal or smokeless fuels. For a more formal look, perhaps for between the living/dining area and the kitchen, think about a modern fire. There are solid-fuel, wood, gas, electric and gel fires available, including flueless models.

Move away from the classic mantelpiece and hearth with fuel basket and explore wall-mounted or recessed modern fires, perhaps with a gas burner and dramatic fire bed consisting of pebbles, geometric shapes, or steel abstract designs built around a discreet gas burner. For larger spaces, consider an eye catching steel stove suspended from the ceiling, such as the striking designs from Diligence Fires.


 The heat output required will depend upon room size, whether it's a primary heat source and other sources of background heat (such as radiators or underfloor heating). The retailer can advise on the best size/model for the room, with some designs available in several heat outputs.


Stoves are generally made from pressed steel or cast iron, and many people refer to them as 'wood burners' or 'log burners', although there are multi-fuel models that can burn both wood and solid fuel.

With a multi-fuel model you'll need to put in a riddling grate when burning coal/solid fuel and remove it when burning logs, which burn best on a bed of ash.

If you live in a smoke-control area and want to burn logs, then you'll need a Defra-approved stove — such as the 7600 series from Morsel. For a fuss-free option, choose a gas model, such as those from Yeoman and Gazco.

Radiator and towel rails

Any of us still prefer to stick with radiators for our kitchen heating; it's usually a cost-effective choice and avoids extra disruption and installation costs.

 Vertical radiators generally provide the best use of space and can make a feature of even a narrow amount of clear wall space.

 Fit a new radiator with thermostatic valves to maintain an even temperature and avoid the necessity of turning the radiator on and off. The other advantage of a radiator, while not terribly glamorous, is having somewhere to dry damp tea towels.

Myson have introduced the Innoko kitchen towel rail that works from a sealed electrical unit and which is independent of any central-heating system and in normal use, consumes less power than a light bulb.

If the wall space is available, consider your kitchen radiator to be a decorative as well as a practical item and look at unusual designs, such as those from Bisque, Jaga, Aeon and Vasco - metal and painted finishes abound, in colors to match your cabinets or kitchen appliances.

Panel radiators (plain, smooth surfaces rather than tubular style or ribbed) often suit a kitchen setting, echoing the shape and proportion of cabinets.  


Stainless-steel radiators offer high corrosion resistance and look stylish in the kitchen. They are available with matt and polished finishes, and some manufacturers, such as Aeon, give 20-year guarantees.

Cheaper chrome or 'silver finish' radiators may suffer from corrosion and flaking surfaces after a relatively short time, and the steamy cooking conditions in a poorly ventilated kitchen may have an adverse effect.  


Another straightforward choice for kitchens is a plinth heater - which can also be used as a cooling fan in hot weather. These heaters are affordable (from around E,135), can be installed in the plinth space beneath a kitchen cabinet with just an electrical connection and can quickly add a boost of heat to the kitchen on a cold morning.

Choose from electric models, central-heating models, or a dual-fuel model, such as the Kickspace heater from Myson, which can run on electricity if the central heating is off. Plinth heaters can be costly to run, and should be considered as a heat booster, rather than the main source of heat in the room.

Underfloor heating

Underfloor heating is very often the first choice for kitchen designers today. Its main advantage is that it is concealed and so does not interfere in any way with the kitchen color scheme or design, yet it is practical and can be economical too, if you opt for the 'wet' water pipe version.


Underfloor heating (UFH) is, in most cases, straightforward to install, as the vast majority of kitchen refurbishments involve new flooring. It can be installed with all types of flooring and provides a gentle, even heat - effectively turning the floor surface into a large heat emitter that feels comfortable underfoot and allows the heat to rise gently.

Kitchen designers involved in a whole-room refurbishment will specify underfloor heating almost as standard; it's now considered to be an integral part of the project.

Make sure that the system is chosen in partnership with the flooring - some flooring manufacturers and suppliers have specific types of UFH which they recommend with their floor coverings.

Likewise it's important the position of appliances is finalized before the UFH is planned - there's little point in UFH being specified for the inside of the larder, under the fridge-freezer or cooker, or beneath an island unit where it's not needed.  

There are two types of UFH, wet systems and dry or electric systems. A wet system is more complex to install and is more appropriate for new structures, such as kitchen extensions or kitchen-conservatories where new floors are built from scratch.

Wet UFH systems consist of seamless polythene pipes, thermostat controls and a pump system connected to the normal domestic hot-water supply. Because of the efficiency of the plastic pipes, water need only be used at around 55°C or less to achieve the same heat output as standard radiators.

Rooms can be 'zoned' so that particular areas can be controlled - there will be a control panel, thermostatic settings and manifold tucked away in a cupboard/utility room. Once the pipes are down, a screed is laid over, then the final floor surface is laid on top.

Most manufacturers give long guarantees for the pipes - Nu-Heat gives a 25-year guarantee on the pipework for its wet systems. Worcester's new Greenfloor wet system has been designed for maximum energy efficiency and to work in tandem with its Greenstar boilers and Greenstore ground-source heat pumps. It requires water temperatures of around 45°C, which uses less energy than standard radiators.  


Dry electric UFH systems use a cable/mat/mesh system that is rolled out to cover the floor and connected to a thermostat and timer. It works with all kinds of flooring - including carpet, provided the right kind of underlay is used. It will heat up from 'cold' quicker than wet systems, as the heat does not need to penetrate a layer of screed. Simple mat systems, such as those from Cosyfloor and Ecofloor by R&D Marketing, are very straightforward to install, and it's well within the capabilities of anyone with a bit of DIY experience. Electric systems cost more to run than wet systems, but have the advantages of often being cheaper to buy and fast heating-up times - so they can be used more easily to give a quick heat boost.  


For larger spaces, trench and perimeter heating are a good option Although it's more commonly specified for offices and public buildings with large expanses of glazing, it can also be used for large-scale modern homes with lots of folding/sliding doors and windows. Have a look at products from Jaga and Fraser Engineering UK, and always take professional advice when making a decision. These systems comprise of water pipes set into a channel around the edge of the room and are most conveniently installed into newly built kitchens, where the floor level and depth can be constructed to the necessary specification.

The benefit of post and beam house designs

Supporting structures are functional and can be used to add a little bit of charm to your interior.
Wooden beams can create a more rustic feel while other styles of beams add something extra to the interior architecture to your residence.

Using beams as part of architecture, construction and design is not a new concept and dates back to the thirteenth century.

Woodsy looking beams can create a completely different living space and can create a whole new look to a restored property.

When shopping for a house, a real estate agent typically describes an older building as having exposed beams or several old timbers present.

This gives a potential buyer the idea that the home is older but also gives the impression of character and coziness.

Structurally, timber frames are very common and have been used in small cottages, large mansions, mills and numerous other types of buildings.

They were commonly used in England around the thirteenth century and were used to frame barns, guildhalls, mill halls and other agricultural based buildings.

These beams make a substantially structurally sound building. Plus, the timber beam support adds character and beautiful detailing to the interior of any home or building.

The use of timber beams are commonly used where other building materials are not as easy to find or are not as affordable. One of these types of supplies is freestone and often residents in other areas use the wooden beams instead. One intricate part of a wooden beam is the intricate design.

If a structural beam on the interior of a building was carved with detail, it was considered a status symbol. Tall narrow panels, called close studding, is another way to construct buildings using this same type of architectural and structural design.

In some areas in England where wool trade had declined, it also impacted the use of timber frame architecture, as ironic as it should seem that the two industries should influence one another. The square paneling is often found in the Midlands region. In addition to the different types of structuring, there are other details.

For example, when a wooden beam is squared off at the end where the beam will enter the wall, it is called chamfer stops. This helps date the building and is also a distinctive structural design in various regions throughout the country.

Ash and elm are common in this design but oak is the most preferred type of wood. What makes a building like this structurally sound is the cross braces and joints that are strong and sturdy are its ability to bear weight.

Usually these beams are wedged, tied an nailed together. Many times these were held together with dirt, straw and even animal dung.

The cracks were then filled with plaster, a finish and usually a lime wash. While living in an older home is very appealing, there can be common problems with the structure and support of foundation and the architecture over all.

Timber extensions can help add space for a more modern living lifestyle. Each home over a period of time has its own character. As a different set of people live in a home over time, it can gradually change appearance.

You can add more to this “chapter” in the history book of your home by complementing aspects in your home that are already present.

Using wooden beams in the structure not only adds a more comfortable feel but in some ways gives it a taste of modernism.
Copyright © 2012 Modern Home Design Ideas by Honoriag.